MODEL: 19 SERIES X 12'
S/N 30348
****SPECIFICATIONS
500 TON RATING AT BOTTOM OF STROKE
335 TON RATING AT MID STROKE
BED & RAM LENGTH: 14' 8-1/4"
****BED SIZE:
8" WIDE X 14' 8-1/2" LONG WITH 1/2" TANG SLOT
****DISTANCE BETWEEN HOUSINGS:
12' 11-1/2" (155-1/2")
****MATERIAL BENDING CAPACITY:
3/8" X 14', 1/2" X 10', 5/8" X 6'
STROKE OF RAM: 4"
POWER RAM ADJUSTMENT: 8"
MAXIMUM PINCHING CAPACITY: 330 TON
MAXIMUM STRIPPING LOAD: 33 TON
MAXIMUM ECCENTRIC LOAD CAPACITY: 500 TON
MACHINE STAND: 11' 3-1/2" ABOVE FLOOR LINE
MACHINE SIDE FRAMES EXTEND 6" BELOW FLOOR LINE
MACHINE BED EXTENDS 40" BELOW FLOOR LINE
****RECOMMENDED FLOOR PIT SIZE:
14" F-B X WIDE X 44" DEEP
MACHINE IS 111.5" OVERALL FRONT TO BACK
CENTERLINE OF BED TO MACHINE FRAME (GAP): 14-1/4"
****DIE SPACE:
14" (STROKE DOWN ADJUSTMENT UP) APPROX.
****APPROX. PIT REQUIRED FOR MACHINE SIDE FRAMES:
56" F-B X 7" WIDE X 7" DEEP
****APPROX. PIT REQUIRED FOR BED PLATE:
5" WIDE X 177" LONG X 42" DEEP
****EQUIPPED WITH:
2-SPEED TRANSMISSION
MOTORIZED RAM ADJUSTMENT MOTOR WITH INTERNAL BRAKE
RAM AND BED MACHINED FOR SMALL ANGLES (NO ANGLE PLATES)
HAS ALL UPPER DIE CLAMPS EXCEPT FOR A 5" SPACE
SIDE FRAME MOUNTED TONNAGE PRESSURE INDICATOR GAUGE
TWIN END DRIVE WITH GEAR GUARDS
(2) AUTOMATIC LUBRICATION SYSTEMS
(4) 24" LONG FRONT MOUNTED WORK SUPPORT ARMS
AIR ACTUATED MECHANICAL FRICTION CLUTCH
MOVABLE FOOT PEDAL ACTIVATION CONTROL
LIGHT SAFETY SYSTEM
BACK GAUGE
****HURCO MODEL # 7
CNC SINGLE AXIS BACK GAUGE
S/N HFAA9030125B
WIRED FOR SINGLE PHASE, 115 VOLTS
****TOOLING:
(1) 1 1/4" x 3 3/4" x 151 3/4" LONG
V PUNCH DIE (NO BOTTOM MATE)
(1) 3 3/8" x 3 3/8" x 14' 1 1/4" LONG
4-WAY BOTTOM DIE
(1) 14' LONG LOWER ADJUSTABLE DIE HOLDER RAIL
4" WIDE x 2 3/4" HIGH WITH 1/2" SLOT AND TANG
(2 PIECES) MALE & FEMALE DIE
3 1/4" WIDE x 146 1/4" LONG WITH (2) U-SHAPED FORMS
****INCLUDES:
MACHINE FLOOR PLAN DRAWING, PARTS & OPERATIONS MANUAL AND ELECTRICAL SCHEMATIC
****MOTOR:
25 HP MAIN DRIVE MOTOR
4 HP RAM ADJUSTMENT MOTOR
****WIRED FOR:
3 PHASE
60 CYCLE
220/440 VOLTS
****DIMENSIONS:
FLOOR SPACE:
10' x 16' x 11' 3" HEIGHT ABOVE FLOOR
TOTAL WEIGHT: 74,000 LBS.
WEIGHT MACHINE WITH RAM BUT BED OFF: 55,000 LBS.
WEIGHT OF BED SECTION: 19,000 LBS
(2) I-BEAM SECTIONS HAVE BEEN WELDED INSIDE THE FRAMES FOR MOVING SUPPORTS
*****GOOD CONDITION!

LOCATION NEW ENGLAND AREA USA.

Company Name:
Person Requesting Information:
Phone:
Fax:
E-Mail Address:
Do you Prefer a :	Call? E-Mail?
Questions or Comments:	Design HTML Preview
	Generate New Image Type the code from the image